Main · Videos; Cetire rojdestvo online dating Although overcame they pardon over phony 7 after rajai davis's eighth-inning pure run dredged the peoplebooks 8 51 online dating peoplesoft peoplebooks 8 51 online dating holiday in the. 8 of 51 Click to see next topic A duration element calculates the time between two dates, by subtracting one date from An online error message appears. PeopleBooks and the PeopleSoft Online Library. [-]PeopleTools PeopleTools PeopleBook: Using PeopleSoft Applications. [-]Development Tools.
Include From and To Date Select to include the from and to dates in the calculation. Include Absence Days Leave this check box deselected to exclude days. For example, if you leave this check box deselected, you can calculate a duration of time minus sick days. Select the Include Absence Days check box to include absence days in the duration calculation. This check box becomes available when the Return Date In value is Days. The system automatically excludes absences if you do not select Include Absence Days and specify a daily absence formula.
To include or exclude the days that a payee is absent, select the formula that returns the number of absent days. To include the days that a payee is absent, you select the Include Absence Days check box.
To exclude the days that a payee is absent, deselect the Include Absence Days check box; now the number of absent days will be subtracted from the total duration count.
The formula is resolved for every day of absence daily history between the from and to dates including those datesand should return a 1 for each absence day it wants to count.
Keep in mind that the first and last day is considered only if the Include From and To Date check box is selected. Your formula must specify the take elements that you want to count. For example, you can use the absence type in an IF statement to count only sick time. Your formula can call any of the system elements that are designed specifically for absence duration. These elements have the same names as those that are used to generate the absence daily data, but they end with the suffix DU.
Click this link to access the Set Daily HR Status Criteria page, where you can include or exclude time periods in the calculation based on HR status codes. If you enter instructions to include daily absence data and include or exclude days based on status codes, the system performs two separate counts and combines the results. For example, if you include active days based on HR status and exclude absence days, the system counts the number of days the payee was active and subtracts the number of days the payee was absent.
Double counting can occur, depending on the instructions that you enter in the two group boxes. For example, if you include active days and days a payee is out sick, the days on which a payee is both active and sick are counted twice.
If the unit of measure on the Durations - Definition page is set to Days, you can include or exclude time periods from the duration based on HR status codes.
You can also specify minimum and maximum periods to check against. Including or excluding status combinations has the following implications at processing time: Include directs the system to include the period with that status combination in the duration.
Exclude directs the system to exclude the period with that status combination in the duration. The code combinations that you enter are, as a group, either included or excluded, meaning that when you include specific status codes, those that you omit are automatically excluded. If you exclude certain codes, those that you don't exclude are automatically included. Additional Period Definitions Use the following fields to further define the periods that you want to include or exclude from the duration.
If Each Sub-Period Select to include or exclude sub-periods of a specified length from the duration. A sub-period is a consecutive number of days that a payee's status remains unchanged.
Whether you can add sub-periods together depends on whether the sub periods are in the same period. Sub-periods are added together if they individually fulfill the criteria.
The system calculates period by period; for each period, it checks the criteria that is defined on this page. If the criteria are met, the system considers the period for inclusion or exclusion. If the criteria are not met, the system ignores the period. The operand is used with the Value and Period fields.
Value The number of years, months, or days to include or exclude from the duration. This value is used with the operand to determine whether the length of time in the selected status is included in or excluded from the calculation. Period The period of time defined in the previous field: Days, Months, or Years. This section provides overviews of variable elements, field formats, and batch processing of variables, and discusses how to: Name variables Define a variable Understanding Variable Elements Variables are a means of storing a value and using it later.
In situations requiring you to input a value—whether in a formula, in a calculation component, or elsewhere—the system enables you to identify the input as a variable and use the same value repeatedly.
Using variables, you can define this value and invoke it anywhere in your formulas and calculations. Example On January 1, the batch process resolves three formulas and two earnings using a monetary factor of 20 in their calculations.
This factor changes to 25 on April 1. If you assign this factor a format type of numeric, you have to make five effective-dated changes, but if you define this factor as a variable element, you have to make only one effective-dated change for the new factor, 25, to be used anywhere the variable is referenced.
Understanding Field Formats Variables can be defined with any one of the following field formats: Character The field length for variables with a character field format is 30 spaces.
Only definitions that have Upgrade selected and Done cleared are copied during an upgrade. Only applies to file references and Application Engine definitions. Allows file references and Application Engine definitions to be executed when applying a change package. The key columns on the left-hand side of the grid are frozen; they do not scroll horizontally.
When you use the horizontal scroll bar, only the upgrade columns scroll, enabling you to see the key information about the definitions at all times. The various definition types have different numbers of key columns. When viewing definition types with a large nonscrolling region, the horizontal scroll bar is disabled unless at least one scrolling column is displayed.
To enlarge the window enough so that you can scroll through the upgrade columns: Maximize the upgrade definition window. Maximize PeopleSoft Application Designer. Hide the project workspace. To display all of the grid columns at one time when the preceding options don't enable you to see every column, use the zooming commands in the View menu.
With each Zoom Out command, the grid size is reduced. You can also resize individual columns by dragging the column border to the appropriate size. If you resize the upgrade columns, save the sizing and use it for every project.
" + strPageTitle + "
Custom key column sizing is not preserved after you close a project; these columns reset to their default size. Using Upgrade Menu Actions To access the pop-up upgrade menu, right-click anywhere in the grid in the upgrade definition window. This table describes the upgrade menu actions and the actions they perform: This is enabled for PeopleCode definition types. Find Definition References Finds all references to the selected definition. Merge Definition Enables you to compare and merge text definitions between two sources, either a file or another database.
Filtering Opens a cascading menu with filtering options that you can apply to the upgrade grid. These same options are also in the View menu. Refresh View Updates the information in the upgrade definition window. Set Action Enables you to select and tag definitions for copying and deleting. Set Action for Project Enables you to select and tag all definitions in a project for copy or delete. Tag for Upgrade Enables you to tag a group of definitions for upgrade.
Untag for Upgrade Enables you to remove the tag on a group of definitions for upgrade. Reset Done Flag Enables you to reset Done check boxes for a group of definitions. You can also use the Delete key. Project Properties Opens the Project Properties dialog box, in which you define properties for the project, like description. Setting Upgrade Options This section discusses how to: Access the upgrade options.
Set report filter options. Accessing the Upgrade Options To access the upgrade options: Select Tools, Compare and Report. Sign in to an upgrade target database. On the Compare and Report dialog box, click Options, and select the appropriate upgrade option tab. Start with the default of If the Copy process seems slow and there is sufficient log file space, try increasing the commit limit. You can modify the initial project default commit limit on the PeopleTools Options page.
Very large commit limits, however, can cause more work if something goes wrong during the copy. For example, if the commit limit is set to 1, and the Copy process stalls on the th definition, none of the previous definitions are copied.
The Copy process must be performed again. Keep Target Audit Flags: Select to preserve all of the enabled target flags. This is the default. Audit flags that are enabled in the source are also retained. Differences between the source and target audit flags are not shown on the compare report. Set Target Audit Flags from Source: Select to copy audit flag settings from the source to the target database.
Select to preserve the target DDLs. Differences between the source and target DDL are not shown on the compare report. Take DDL from Source: Select to copy the DDL from the source to the target database. Portal Structures Permission List Select one: Select to preserve the target portal structures permission list references. Set References from Source: Select to copy the portal structures permission list references from the source to the target database.
Keep Target Display Size: Does not copy any display changes to a ChartField on the source database the target values are saved. If this is set for a Compare process, no differences between the source and target in the named fields are displayed.
If the only differences on the page are the ChartField display properties, then the page compares as the same for both. Set Display Size from Source: Copies the position, as well as the size and type attributes, from the source to the target database. Set the Database Field Format: Keep Target Field Format: Does not copy any changes to the field format values for a database field that is a ChartField on the source database, and preserves the target field format values.
If this is set for a Compare process, any changes to the ChartField field format attributes are not displayed. If these attributes are the only changes for a field, then the definition compares as the same for both.
Set Field Format from Source: Copies the ChartField field format attributes from the source to the target database. Compare Options tab Compare Type Target Orientation Select Project to compare only the definitions of the specified definition type in the current project.
The contents of the project do not change. Select Database to compare all definitions of the specified definition type. If you select Database, the contents of the current project are deleted and replaced with definitions that are found during the comparison.
Determines how the Upgrade check boxes in the upgrade definition window are set for definitions that were last modified by the customer in one database and last modified by PeopleSoft in the other database.
Use the drop-down list box to select from lower common releases. Use LastUpdDttm last update date and time and LastUpdOprid last user to update definition to improve the performance of the compare process for larger compare projects. If these options are selected, Application Designer uses only these values to assess differences between PeopleCode definitions. If it is determined that the PeopleCode definitions are different, Application Designer proceeds to compare all attributes of the definition as normal.
Compare Languages Select the languages of definitions that you want to compare, and select COMMON, which specifies basic definition characteristics and parameters in the architecture that are not language-sensitive. Language options specify labeloriented characteristics of a definition, such as page names, labels, and messages.
PeopleTools PeopleBook: PeopleSoft Application Designer Lifecycle Management Guide - PDF
Clicking Select All is the recommended default. Make sure that the base languages in the source and target databases match. Press the Ctrl key and your mouse to clear unwanted languages. Displays the compare report output directory. To change the output directory path, select Tools, Options from the PeopleSoft Application Designer toolbar, and select the General tab. Displays the font type and size that will appear in the compare report output.
PeopleTools 8.51 PeopleBook: PeopleSoft Application Designer Lifecycle Management Guide
Click Font to select a different font or to change the font size. Select to generate HTML reports that you can view in a browser in addition to the reports that appear in the Application Designer workspace. Generate Output to Tables: Select this option to write the compare output to database tables. This enables you to keep a historical record of your compares in your database, and it also provides you the flexibility of being able to design custom queries for analyzing specific definitions, attributes, and so on.
The following PeopleTools tables store compare data: Contains high-level information related to the compare, such as project name, target database name, source database name, compare release, and so on. Contains data related to the individual definitions that are being compared, including definition type, definition name, source status, target status, and so on.
Contains specific data for the individual attributes compared. Select to generate a composite report, which is a subset of information showing only the definitions customized at your site that were also modified in the most recent PeopleSoft release. Old Release Report Output Directory: Enter the directory containing the compare reports run on the database for your previous PeopleSoft installation: Old Release Source Database Name: Enter the source database name you specified when running the compare reports on your previous PeopleSoft installation.
This enables the system to identify the appropriate database definitions listed within the compare reports. For PeopleCode compare reports, specify whether to show the entire program on the report the default setting or only the code differences between the source and target. If you select the latter, you can specify the number of code lines to show above and below the difference for context. The values for the number of lines to show are 0 to A value of 0 shows only the difference line.
A value greater than 0 shows that many lines above and below the difference line. The PeopleCode report options are global across all projects. Changing settings for one project changes all subsequent PeopleCode compares, regardless of project. Report Data Color Select the report data color. Use the Browse button to display the standard color dialog box. Choose a color that is not included in the drop-down list box or create a custom color.
Select a color for additional data values on the source database. These are also source-only values. The default value is dark green. Select a color for data values that are deleted from the source database.
These are target-only values. The default value is red. Select a color for changed values, which are both source and target values. The default value is blue. Report Filter tab When you perform a comparison, the system generates a report for each definition type compared. These reports provide detailed information about how each definition in the source differs from its counterpart in the target. Before performing a comparison, you can select the definition status combinations with which you generate reports by using report filter options.
For example, during an upgrade to a new PeopleSoft release, you might decide that if a definition that was last changed in the target by PeopleSoft is found in the source and it hasn't changed since the last upgrade, you don't need to see information about the definition differences because you intend to accept the new PeopleSoft version.
In this case, you want to filter the compare reports so that a report is not generated if: The source is any status. The target is unchanged. Filtering comparison reports does not affect which definitions are added to a project during a database comparison, only which definitions are reported.
Definitions that are defined differently in the two databases are always added to the project. Select the check boxes corresponding to the definition status combinations that you want to report. Each row in the matrix corresponds to the definition status in the source database. Each column corresponds to the definition status in the target. To reset your selections to the default setting, click the Default button.
To select all definition status combinations, click the Select All button. If you don't want to generate any reports, click the Deselect All button to clear all of the check boxes. Upgrade Options dialog box: Language options specify label-oriented characteristics of a definition, such as page names, labels, and messages.
Click Select All is the recommended default. Make sure that the languages in the source and target databases match. Otherwise, you might overwrite translations in the target. Use the Ctrl key and your mouse to clear unwanted languages. When you save the project, the copy settings that you made are saved and remain set unless you change them again.
This table lists translation scenario examples: Languages omit COMMON You sent the database out for translations and want to avoid copying inadvertent changes that were made by the translators to the definitions. Preparing Projects for an Upgrade This section provides an overview and discusses how to: Print all definitions in a project. Obtain access for upgrading. Understanding Upgrade Projects Before you can copy definitions from one database to another, you must insert them into a PeopleSoft Application Designer project.
If you have a custom application, identify which definitions must be copied from the source into the target database. When you know which definitions you want to upgrade, specify and insert the definitions into the project.
When you populate a project by comparison, the system compares the source and target databases and automatically populates the project with definitions that are defined differently in the two databases. Populating Projects To populate projects: PeopleSoft Application Designer designates certain definition types as related to a parent or controlling definition type. For example, a record's related definitions can include fields, indexes, and subrecords.
When you insert definitions into a project for upgrading, it can be important for these related definitions to be included. Select the definitions and click Insert. On the Project tab, review the settings in Related Definitions Options and reset. Searching for Definitions To find a definition in the project select Edit, Find from the menu.Ourtime Review — Dating Over 50
This opens the Find dialog box where you can perform a search for a text string in an upgrade definition window. Printing All Definitions in a Project You can print a project definition for all of the definition types in the current project.
This differs from the Print menu item, which prints only the currently selected definition type that is open in the upgrade grid. The data, however, is the same. To print a project definition for all definitions in current project, select File, Print Project from the PeopleSoft Application Designer toolbar. Obtaining Access for Upgrading To use the PeopleSoft Application Designer upgrade features, you must have full access to projects and upgrade access in the target database.
Also, lock all PeopleSoft Application Designer definitions in the source and target databases before comparing and copying projects. To do this, you need supervisor-level access to Change Control in the Tools menu. If your Change Control administrator performs this action for you, the administrator's user ID is the only one that is allowed to perform the copy while the target definitions are locked.
Determine whether errors were encountered. Understanding Upgrade Messages During the compare and copy processes discussed in this section, if the system encounters any errors you will be notified through system messages.
These messages alert you to various areas that may need to be corrected for a successful upgrade compare and copy. Determining Whether Errors Were Encountered Select the Upgrade tab in the output window to determine whether any errors were encountered during the Compare or Copy process.
Upgrade view in the output window This view displays upgrade messages pertaining to the definition type that was most recently displayed in the upgrade definition window.
In the preceding example, Access Groups was the last definition type that was viewed in the window. Viewing Messages To view messages: Select the Upgrade tab in the project workspace. Double-click the folder of the definition type for which you want to view messages, or click the project icon to view all messages. Any upgrade messages for that definition type appear in the output window. Printing Upgrade Messages To print upgrade messages: View the messages that you want to print.
Right-click the output window and select Print. Clearing Messages To clear messages: View the messages that you want to clear. Right-click the output window and select Clear. Work with compare reports. Work with workspace reports. Work with browser reports. Work with composite reports. Work with definition status. Compare and merge page definitions.
Compare definitions for upgrade using the command line. Understanding the Compare Process PeopleSoft Application Designer enables you to compare the contents of the database to which you are signed on or project within with the target database or an exported project file. It enables you to view the status of each definition in each location so you can then decide which definitions to keep.
There are two ways to compare definitions: Compare all database definitions of a certain type, such as record definitions. After doing so, you populate the upgrade project with only the definitions that are defined differently in the source than in the target. Compare only the definitions in the current upgrade project to the equivalent definitions in the target database or file.